Hatz Biplane Association

I took a scrap piece of streamline tube and tacked a short 3/8 OD rod to it. Used it as a form to bend the strap around and used an 8-32 on the trailing edge end to clamp the strap together. Used a strip of black naugahyde inside it to protect the finish on the cabane.

Steve G

You will probably have to make them. We used scrap 6061-T6 which was easy to form around the strut. Any soft aluminum will work too.
John Hanson

Can these clamps (see picture of the cabane below) be purchased or are they builder-fabricated?

-Scott